Upgrades Advance OvaEasy incubators to EX specification.
Improved control for valuable and hard-to-incubate eggs.
The standard OvaEasy Series II 100, 190, 380 and 580 Advance provide a continuous readout of incubation humidity but requires the user to alter humidity to achieve the ideal average level. The EX version with the Humidity Pump effectively maintains the humidity level precisely at the level the user sets irrespective of changes in room humidity and so overcomes problems that can commonly lead to eggs failing to hatch – especially in the latest stages of incubation. The Humidity Pump includes an external water reservoir eliminating the chances of water in the incubator harbouring bacteria.
The Humidity Pump module is designed to work seamlessly with the OvaEasy Series II 100, 190, 380 and 580 Advance incubators. Installation is a simple plug-in.
The pump is also compatible with the older style TLC-40 TLC-50 Advance Models Intensive Care units (not Series II models).
Protected by Biomaster antimicrobial additive: proven to reduce bacterial growth by 99.99% and 100% safe for eggs, chicks and humans. Protects hatches from microbial transfer by cross contamination helping to reduce unexplained hatching failures.
Product code: AD25
Specification
**This pump is not compatible with any other models of the Ova-Easy other than ADVANCE MODELS**
Also compatible with the older OvaEasy 100, 190, 380 and 580 Advance incubators.
The pump is also compatible with the TLC-40 and TLC-50 Advance Intensive Care units.
Holds the humidity very well, and removes all the stress of having to keep checking that the incubator has water in. Just a little bit noisy, when its refilling.
Humidity pump
Posted by Karen Taylor on 12/02/2020
Takes all the hassle and stress out of incubation. Wouldn't be without one! So simple to setup and operate
Worth every penny
Posted by Catherine on 12/02/2020
Bought this to go with my octagon 20. Easy to set up and really takes the stress out of keeping the humidity levels right. Worth every penny.
Great product
Posted by Peter on 30/03/2019
First year using the humidity pump really helped boost our hatch rate. Great product definitely recommend it.
Humidity pump
Posted by Graham c Page on 12/08/2018
Bought two of these three years ago. Keep humidity EXACTLY to the setting,and holds it! Important to know you need to replace silicone pipes every couple of months. Successfully hatched American Kestrels this year for the first time,also kookaburras for the second time. Only ever use Brinsea equipment including incubators and brooders.
Good product
Posted by Eoin on 10/08/2018
Works brilliantly with my brinsea 380 egg incubator. Can control the humidity to the exact percent which is extremely helpful especially at hatching, the only thing is to be careful the tube doesn’t fall out of the sponge and spill, if it does it spills to the floor no electrical damage just have to clean it up. Really good product, glad I purchased!!
Easy to connect
Posted by Mohamed on 21/09/2017
No more checking if there is water in the incubator. The humidity reading is more constant. It’s very easy to connect and install. I personally think every incubator must have one.
We made our own resovoir.
Posted by Sandy on 31/03/2014
I am happy with the incubator itself however the humidity pumps water resovoir needs refilling mutiple times a day and there doesnt prove to be useful so instead we made our own resovoir by using a bucket of water which hasnt been refilled for 2 weeks and is still mainly full. So I am now satisfied.
Noisey
Posted by Brooke Hill on 25/10/2012
I feel the need to right you this review about your humidity pump for the brinsea overeasy 360 and 180, infact its ntot just the pump, its the whole incubator, Its noisey, fills with limescale, even from bottled water bought from the shop, the actuall circuit board had blown twice on me, once halfway through the middle of a incubation, took brinsea 4-5 weeks to send me a replacement card, I would not reccomend this product, and id buy from R-com next time, thought i was putting my money to brinsea for good quality , i wasnt :(
Response from Brinsea: We're sorry that you have had problems. Bottled mineral water has far more dissolved solids than tap water and will leave more deposits. Distilled water shouldn't leave any residues. We sent you a new circuit board to rectify the problem and requested that you return the faulty circuit boards to establish what the problem was but it appears that you did not send them back. If you could do this we can then provide you with a report on the problem.
Purchased last year.
Posted by Samuel Brush on 01/03/2012
I purchased an OvaEasy 190 incubator last year and need to consider an easier and more consistent humidity management strategy. Keeping the unit water reservoir filled was a never ending task! This humidity management system seems like a good option, although somewhat expensive. I need to check the details from one of the U.S. suppliers.
Works well but...
Posted by Mr John Laben on 13/09/2011
I have had this humidity pump for 2yrs now and it has worked very well apart from one design fault, if the top plastic tube splits then the motor housing fills with water killing the motor. I have had this happen to me twice now it 2 years. the pump needs to be redesigned to make the pump housing waterproof. At £40+ at time it gets expensive.
40 years of experience goes into every Brinsea product
I've just had a fantastic hatch of 24 out of 24 eggs in my Brinsea Octagon 20 Auto Eco and recommend your products a lot to people who want to buy an incubator, thank you very much and look forward to...
Good morning. Just wanted to say thank you. I think this is our 5th season with a Brinsea incubator and consistently getting really good results with your product, from varying egg suppliers. My daughter...
Excellent customer service! I contacted you guys earlier to ask for help ordering a spare part for an incubator that I couldn't find on the website. Whoever I spoke to bent over backwards to help and replied...
